BMD Street Consulting

  QHSE Training and Engineering Consultant

Training Drilling Well Completion And Work Over (13-15 Oktober 2014 Bandung)

TARGET TRAINING DRILLING WELL COMPLETION AND WORK OVER

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar drilling dan penyelesaian sumur produksi minyak dan gas bumi (oil and gas well completion)  .
  • Melakukan diagnosis sederhana dalam menagani problema pada sumur produksi di lapangan yang disebabkan oleh reservoir atau fasilitas produksinya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk sumur-sumur minyak yang diproduksikan dengan cara gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan dan perancangan ulang penangan problema kepasiran di sumur produksi.

MATERI  TRAINING DRILLING WELL COMPLETION AND WORK OVER

Introduction : Rotary Drilling Operations

  • Steps to drilling a well
  • Types of rigs
  • Rig Components
  • Rig Systems

Rheology of Drilling and Completion Fluids

  • Equations and Inflow Performance RelationshipFunctions of Drilling/Completion Fluids
  • Fluid Types,
  • Fluid Models
  • Introduction to Rotary Viscometer
  • Other Testing Equipment

Objectives of Monitoring Fluids

Mud System

  • General Equations and ConceptsDiagnostic tests
  • Water based muds
  • Oil based muds
  • Additives
  • Mud handling system

Cementing

  • Tubing DesignFunctions of cement
  • Cement Types
  •  Cement Additives

Oil Field Tubulars and Hydraulics

  • Drill string
  • Casing and tubing
  • Casing classification
  • Stresses on casing
  • Casing setting depth
  • Burst and collapse calculations
  • Wellheads

Drilling System – Pressure Loss Calculations

  • Hydrostatics
  • Buoyancy
  • Flow through pipes and annuli
  • Flow path
  • Pressure loss calculations

Drilling System – Bit & Nozzles

  • Hydrostatics Bit Types
  • Bit Parts
  • Bit Classification
  • Bit Nozzles

Introduction to Well Control

  • Hydrostatics Definitions
  • Causes of kicks
  • Kick indicators
  • Shut-in procedure
  • Well Kill Procedures

Directional Drilling

  • Reasons for directional wells
  • Planning Trajectory
  • Kickoff Methods
  • Survey Methods
  • Survey Calculations
  • Hole Assemblies
  1. Pendahuluan
  2. Penyelesaian sumur (Well Completion)
  •        Tipe-tipe penyelesaian sumur
  1. Tipe penyelesaian sumur berdasarkan pemasangan pipa selubung
  2. Tipe penyelesaian sumur berdasarkan jumlah zona produksi
  • Peralatan bawah tanah
  1. Pendahuluan
  2. Peralatan produksi bawah sumur
  • Penyelesaian sumur untuk sumur-sumur pengangkatan buatan
  1. Sucker Rod Pump (Pompa angguk)
  2. Electric Submersible Pump
  3. Gas lift
  4. Hydraulic Pump
  5. Pompa Jet
  6. Kerja ulang sumur (Work Over)
  • Faktor-faktor penyebab kehilangan produksi
  1. Problem Reservoir
  2. Problem mekanikal
  • Perawatan sumur
  1. Kerusakan Peralatan
  2. Masalah Parafin
  3. Pengendapan Scale dan Pengontrolannya
  4. Masalah Pasir
  5. Kerusakan Formasi
  • Tipe-tipe Pengerjaan Kerja Ulang Sumur
  1. Mengubah Zona Produksi
  2. Perangsangan Sumur (Well Stimulation)
  3. Squeeze Cementing
  • Peralatan Kerja Ulang
  1. Menara (Rig) Konvensional
  2. Unit Wireline
  3. Gulungan Tubing Tanpa Sambungan (Endless Tubing Coil)
  4. Unit Snubbing

Sand Control Technology

  • Sand Control Concept
  1. Reason for Sand Control
  2. Determining Need for Sand Control
  3. Selecting Type of Control
  4. Proper Drilling and Completion
  • Gravel and Screen Selection
  1. Slot and Gravel Size Design
  2. Slotted Liners
  3. Screens
  4. Prerpacks
  • Inside Gravel Packing
  1. Perforation Packing
  2. Two Stages Methods
  3. Use of Viscous Carrying Fluid
  4. Downhole Equipment
  5.  Type of Operation
  6. Sigle Stage Methods
  • Open Hole Gravel Packing
  1. Conventional Methods
  2. Special Tools and Operations
  3. Zone Isolation Methods
  4. Model Study Result
  5. Deviated Well Problem and Solutions
  • Consolidation
  1. Formation Consolidation
  2. Consolidation System Features
  3. Well Preparation and Design Factor
  4. Consolidated  Packs
  5. Water Base Systems
  6. Thermosetting Gravel Packs
  • Stable Arc Sand Control
  1. The Stable Concept
  2. Applying Stress for Sand Control
  3. Conventional Cementing Limitations
  4. Downhole Equipment
  5. Type of Operation

PESERTA

Semua pihak dengan latar belakang  : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer dalm industri dan kontraktor Oil and Gas

Instruktur

Dr.Ir. Sudjati Rachmat, DEA adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dr Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll. Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain. Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

Asisten :

  1. Andryan Pradipta Putra
  2. Kevin Anggriawan
  3. Wijoyo Niti Daton

DURASI

3 Hari

FASILITAS

Sertifikat, Modul pelatihan,Training kit, Tas Ransel, Jacket, Lunch, 2 Coffe break, Pelatihan dilaksanakan di Hotel bintang empat atau lima

INFO & PROMO

Hub      : 021 – 3280 5064, 3280 5074

CONTACT PERSON

0813 8280 7230

JADWAL TRAINING DRILLING WELL COMPLETION AND WORK OVER TAHUN 2014 :

  • 13-15 Oktober 2014 Bali
  • 12-14 Nopember 2014 Yogyakarta
  • 29-31 Desember 2014 Lombok

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Speak Your Mind

*